• Piping_How to read isometric drawings_Basic

    This video explain about How to read piping isometric drawings before start the fabrication work? This channel explain about piping isometric,ndt,welding,cutting,pipe fit-up,fabrication,erection,elbow cutting,elbow center calculation, welding process,p&id details,valves,pressure gauge, hydro testing details, welding calculation, pipe supports,equipment,pumps,Trigonometric formula application, pipe offset calculation, pipe fitter manual. Watch and Subscribe:https://www.youtube.com/Technicalpiping Like :https://www.facebook.com/pipingtechniques

    published: 20 Mar 2016
  • How to model horizontal vessel in pdms sp12.1

    This video provides the information how to model horizontal equipment in pdms. For more information check here http://www.pipingdesign.info/

    published: 25 Aug 2014
  • Pre purchase condition inspection

    Pre purchase vessel condition inspection Pre-purchase ship condition survey in Vietnam, worldwide carried out by AIM Control Inspection Group. SUPERFICIAL PRE-PURCHASE INSPECTION TO BE CARRIED OUT BY AIMControlGroup.Com: In order for our Surveyors to conduct the required Superficial Pre-Purchase Inspection, please ensure that the Owners of the vessel and/or their Brokers are aware of the following requirements, which are to be passed on to the vessel's Master and Chief Engineer. Our Pre-purchase survey will be requested: • Full access to the vessel -- all areas including amongst others All cabins, Galley, public areas, recreation areas, Gymnasiums if on board, life boats, all stores excluding bonded store only, medical chest and hospital, duct keel if exist, all engine room, emergency...

    published: 06 Mar 2009
  • SCP-616 The Vessel and the Gate | Object Class: Keter | cognitohazard scp

    SCP-616 is a prototype Boeing ███-███, designed by █████ █████████ and constructed in 16/06/1966 to specifications. Though superficially similar to the Boeing 737 which went into service shortly afterwards, SCP-616's model had various internal alterations, including [DATA EXPUNGED]. Despite the various alterations, the most important feature of SCP-616 is the center left emergency door, which has been dubbed SCP-616-1. Read along with me! ♣Read along: http://www.scp-wiki.net/scp-616 http://www.scp-wiki.net/interview-616-am Check out my SCP Playlists! Season 1: https://www.youtube.com/watch?v=H0xFp1HRmSQ&list=PLWbMmdyBjyTxAdPDhu-K3KbOuG-cebCvL Season 2: https://www.youtube.com/watch?v=CUMD8Jlhk5k&list=PLWbMmdyBjyTwtSTBO1AuXI0O_BoU1NH-j Help me out on Patreon! ▼Patreon▼ https://www.pat...

    published: 14 Nov 2015
  • how to create piping plot plan in pdms draft software sp12.1

    pdms , pdms modeling, You can get the information from this video how to create the GA drawings in Pdms draft. For more information regarding pdms modeling video and piping designing related information check from this source. http://www.pipingdesign.info/

    published: 16 Aug 2014
  • RoRo Reefer KNUD E. HANSEN A/S

    The design of this RoRo Reefer Vessel was developed in close co-operation with Stena RoRo and Reefer Intel. The vessel is intended for world-wide operation as a RoRo Reefer Vessel in the banana trade with special emphasis on fast and efficient cargo handling in port - also "green technology" has been considered for the machinery plant of this vessel. 40% lower unit cost 45% more capacity than traditional reefers Load and discharge in only 12 hours, compared to the average 36-48 hours Slow steaming/Fuel Saving - See more at: http://www.knudehansen.com/references/ro-ro-vessels/roro-refeer/#sthash.ckxT7no1.dpuf KNUD E. HANSEN A/S is a leading consultancy providing a comprehensive range of design, engineering and project management services to shipyards and ship owners around the world. Our...

    published: 08 May 2014
  • RoPax Ferry Company - EUR 500,000

    Full specification and contact details: https://www.apolloduck.com/z/494808 This is a unique opportunity to enter as major shareholder,in a shipowning company ,specialised in subsidised EU sea lines.This remarkable investment will be accompanied by a three to five yera amortisation plan and the flexibility and experience to operate in European Union member states. Minimum Capital required Euro 500.000.... read more at: https://www.apolloduck.com/z/494808

    published: 18 Feb 2017
  • U.S. Military's Most Powerful Cannon - Electromagnetic Railgun - Shoots 100 miles - Mach 7

    The U.S. Navy is tapping the power of the Force (of Star Wars fame) to wage war. Its latest weapon is an electromagnetic railgun launcher. It uses a form of electromagnetic energy known as the Lorentz force to hurl a 23-pound projectile at speeds exceeding Mach 7. Engineers already have tested this futuristic weapon on land, and the Navy plans to begin sea trials aboard a Joint High Speed Vessel Millinocket in 2016. “The electromagnetic railgun represents an incredible new offensive capability for the U.S. Navy,” Rear Adm. Bryant Fuller, the Navy’s chief engineer, said in a statement. “This capability will allow us to effectively counter a wide range of threats at a relatively low cost, while keeping our ships and sailors safer by removing the need to carry as many high-explosive weapons....

    published: 17 Mar 2017
  • Piping Flange and Gasket Fabrication Formula

    Piping Flange and Gasket Fabrication Formula. Piping,Welding,Non Destructive Examination-NDT Common Piping Angles and their Solutions,Known and Unknown Angles and Angle Chart,Solving Rolling Offsets,mitered Pipe Cuts,Multipiece Mitered turns, "Y" Layout,90 deg. Saddle on (tees) Standard Weight Pipe,Pipe Circumference Divided into Equal Parts,90 deg.on (tees) extra Strong Pipe,90 deg. Eccentric Pipe Intersections, 45 deg. laterals,Concentric and Eccentric Supports on 90 deg. Long Radius Elbow,3 Types,Angle between Bolt Holes of Flanges, Pipe template layout,orange Peel head layout,Concentric Reducer Layout,Eccentric Reducer Layout,laying out Bolt Holes in Flanges,laying Out Ordinate Lines and lengths,Tank coil layout,Angle Iron Miter Cuts and Brackets,Special Offsets and Solutions,Slip or S...

    published: 16 Dec 2015
  • Liquefied natural gas

    Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4) that has been converted to liquid form for ease of storage or transport. It takes up about 1/600th the volume of natural gas in the gaseous state. It is odorless, colorless, non-toxic and non-corrosive. Hazards include flammability after vaporization into a gaseous state, freezing and asphyxia. The liquefaction process involves removal of certain components, such as dust, acid gases, helium, water, and heavy hydrocarbons, which could cause difficulty downstream. The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). LNG achieves a higher reduction in volume than compressed natural gas ...

    published: 31 Jul 2014
  • Test Package Satisfied - PipingWeldingNonDestructiveExamination-NDT

    Piping,Welding,Non Destructive Examination-NDT Common Piping Angles and their Solutions,Known and Unknown Angles and Angle Chart,Solving Rolling Offsets,mitered Pipe Cuts,Multipiece Mitered turns, "Y" Layout,90 deg. Saddle on (tees) Standard Weight Pipe,Pipe Circumference Divided into Equal Parts,90 deg.on (tees) extra Strong Pipe,90 deg. Eccentric Pipe Intersections, 45 deg. laterals,Concentric and Eccentric Supports on 90 deg. Long Radius Elbow,3 Types,Angle between Bolt Holes of Flanges, Pipe template layout,orange Peel head layout,Concentric Reducer Layout,Eccentric Reducer Layout,laying out Bolt Holes in Flanges,laying Out Ordinate Lines and lengths,Tank coil layout,Angle Iron Miter Cuts and Brackets,Special Offsets and Solutions,Slip or Spectacle Blind Data,Centers of Eccentric reduc...

    published: 13 Mar 2017
  • Drawing Generation in CADWorx

    Help us caption & translate this video! http://amara.org/v/6uEo/

    published: 13 May 2017
  • Pipeline Test pack dossier administration

    Test Pack Dossier Management Database Application., part of the article : "Get efficient, not just busy. Pipeline Testing: A Test Pack Dossier Management Application" http://bit.ly/2kXbWSf

    published: 01 Feb 2017
  • Aveva PDMS\Paragon\Globe Valve Category Creation - PART II

    Create Globe Valve Category in Paragon SOCIAL LINK: https://www.linkedin.com/profile/view?id=189823632&trk=nav_responsive_tab_profile

    published: 04 Aug 2014
  • PML PDMS GA support tool

    published: 26 Dec 2017
  • Clip & Orthogen, Section VIEW

    Structural Section VIEW

    published: 05 Jul 2017
  • CADWorx - IConfigure Tie Into 3D Model

    Keystone Employee Training tieing ISOGEN to CADWorx plant for the Isometric generation.

    published: 08 Nov 2017
  • AVEVA PDMS - drafting module basics

    this video contains basic drafting skills for general idea of aveva pdms 12 including inserting departments registry, views dimensions, notes, tags, and export to Dxf(Autocad)

    published: 25 Mar 2014
  • CHHELLO DIVAS with Eng Subtitles - Superhit Urban Gujarati Movie Full 2017 - A New Beginning

    The Movie revolves around the lives of eight friends, showcasing their journey of growing up, highs and lows of their relationship, love and compassion, end of college days and beginning of a new life. Star Cast: Yash Soni | Malhar Thakar | Janki Bodiwala | Mitra Gadhvi | Kinjal Rajpriya | Aarjav Trivedi | Rahul Raval | Netri Trivedi | Mayur Chauhan | Prapti Ajwalia | Prashant Barot | Jitendra Thakkar Written & Directed by: Krishnadev Yagnik Presented by: Belvedere Films Genre: Comedy નવા નાટક, ફિલ્મ, ગીત, કોમેડી સીન વગેરે અપલોડ થયાની જાણકારી તમારા ઇમેઇલ એડ્રેસ પર મેળવવા માટે હમણા જ આ ચેનલને સબ્સ્ક્રાઇબ કરો: http://www.youtube.com/subscription_center?add_user=shemaroogujarati To get regular updates on new releases(Natak, Films, Songs, Comedy Scenes and much more), subscribe to our cha...

    published: 26 Apr 2016
  • Prepper Tip: Stainless Steel & BPA Free Plastic Bottles - Project Prepper

    Running through some brief info on the stainless steel water bottles and BPA free plastic water bottles specs and explaining their importance for EDC and Survival alike.

    published: 21 Jan 2015
  • How to model vertical equipment in pdms SP12.1

    In this video user can lean how to do the equipment modeling in pdms 12.0 along with how to modify the equipment etc.For more info check here http://www.pipingdesign.info/

    published: 25 Aug 2014
  • OrthoGen for CADWorx

    published: 28 Mar 2017
  • How to create Structure MTO Report in pdms sp12.1

    Check from this video how to create the MTO report in pdms. For more information regarding structure, piping and equipment modeling in pdms check here http://www.pipingdesign.info/

    published: 08 Mar 2014
  • MACRO IN PDMS FOR PIPE-SUPPORT AUTONAMING WITH SETTING RULES AND FILTER

    COMPARING ALL MEMBERS OF STRUC AND LIST ALL THOSE MEMBER ARRANGE THEM, IF DESCRIPTION IS THE SAME, COMPARING ALL STRUC EACH OTHER AND FILTER THEM IF ALL MEMBERS OF STRUC ARE THE SAME OF QUANTITY AND THE SAME OF WEIGHT, PUTTING IN THE SAME NUMBER

    published: 24 May 2014
developed with YouTube
Piping_How to read isometric drawings_Basic
3:12

Piping_How to read isometric drawings_Basic

  • Order:
  • Duration: 3:12
  • Updated: 20 Mar 2016
  • views: 116767
videos
This video explain about How to read piping isometric drawings before start the fabrication work? This channel explain about piping isometric,ndt,welding,cutting,pipe fit-up,fabrication,erection,elbow cutting,elbow center calculation, welding process,p&id details,valves,pressure gauge, hydro testing details, welding calculation, pipe supports,equipment,pumps,Trigonometric formula application, pipe offset calculation, pipe fitter manual. Watch and Subscribe:https://www.youtube.com/Technicalpiping Like :https://www.facebook.com/pipingtechniques
https://wn.com/Piping_How_To_Read_Isometric_Drawings_Basic
How to model horizontal vessel in pdms sp12.1
27:40

How to model horizontal vessel in pdms sp12.1

  • Order:
  • Duration: 27:40
  • Updated: 25 Aug 2014
  • views: 5398
videos
This video provides the information how to model horizontal equipment in pdms. For more information check here http://www.pipingdesign.info/
https://wn.com/How_To_Model_Horizontal_Vessel_In_Pdms_Sp12.1
Pre purchase condition inspection
6:01

Pre purchase condition inspection

  • Order:
  • Duration: 6:01
  • Updated: 06 Mar 2009
  • views: 1488
videos
Pre purchase vessel condition inspection Pre-purchase ship condition survey in Vietnam, worldwide carried out by AIM Control Inspection Group. SUPERFICIAL PRE-PURCHASE INSPECTION TO BE CARRIED OUT BY AIMControlGroup.Com: In order for our Surveyors to conduct the required Superficial Pre-Purchase Inspection, please ensure that the Owners of the vessel and/or their Brokers are aware of the following requirements, which are to be passed on to the vessel's Master and Chief Engineer. Our Pre-purchase survey will be requested: • Full access to the vessel -- all areas including amongst others All cabins, Galley, public areas, recreation areas, Gymnasiums if on board, life boats, all stores excluding bonded store only, medical chest and hospital, duct keel if exist, all engine room, emergency generator room, CO2 room, navigation bridge, laundry space, and other spaces, areas which upon spot request we would like to see. • To allow to take some spot UTS • Full access to all log books and records. • Internal inspection of the following tanks: - Fore peak tank. - Two double bottom tanks which are adjacent to Fuel oil tanks. - After peak. - Six top wing tanks ( one in the mid ship and one in the aft part of each hold Provide the following plans and documents / records for scrutiny and copies thereof: • All vessels: GA, Capacity, Mid-ship Section and Shell Expansion and Docking PlansContainer Stowage Arrangement and Securing / Lashing plans, including inventory of securing equipment. • Builder's particulars booklets -- Hull & Machinery. • Last two UT gauging report. • Last Special Survey report. • Last two Dry-docking report. • Last Dry Docking -- maintenance and repair report from superintendent & ship repair contractors • Class Records, i.e. the latest "Quarterly listing of Surveys" / "Survey Status" including all Class Survey Reports (Hull and Machinery) issued since the last Dry Docking or Special Survey. • Machinery Records -- maintenance etc., to include: - ME running hours since last overhaul. - Auxiliary Machinery running hours (all). - ME performance and running data. - ME cylinder and liner inspection report. - ME crankshaft deflection report. - ME clearances report -- all main components. - Diesel Generators overhaul inspection reports, including crankshaft deflections. - Electrical Insulation Test -- Megger test (latest). - Both Main Engine spares list. - Diesel Generators spares list. - Electrical spares list, including motors. - Last two Lubricating Oil analysis for all machinery (including Main Engines, Auxiliary Engines, Stern Tube, Deck machinery, winches and cargo gear). - Boiler and Cooling water treatment records. - Main engine: at least 4 inspection covers in way of engine camshaft to be open for inspection of cams while engine is being turned with turning gear. As well as 2 crankcase inspection doors to open • Deck Department spares and paint inventory. • Painting Schedule and suppliers specification -- all areas. • Cargo gear spares and record of wires in use. • Inventory of Fire Fighting and Safety Equipment • Record of Safety Equipment. • Inventory of Navigation & Radio (GMDSS) equipment. SVDR. And all additional equipment which is required as per regulations. • All ship's Class and Statutory certificates, including SOPEP, Cargo Securing Manual and Loading Instrument as well as Grain & Stability Approval. • List of 'ALL' ship's Certificates. • Planned Maintenance reports -- recent monthly reports (deck and machinery) -- covering a twelve (12) month period. • Cargo RecordsVoyage Abstracts -- speed and consumption for past 12-month period. Please kindly contact with us when you need to enquiry our services. Best Regards, Dr Capt Nguyen Te Nhan / G.D Agriculture - Industry - Marine Control Inspection Group ------------------------------------------------------- Tel : +84-8-3832-7204 Fax : +84-8-3832-8393 Cell : +84903615612 E-mail: ceo@aimcontrolgroup.com; aimcontrol@vnn.vn; aimcontrol@media.net.vn MSN : aimcontrol@hotmail.com Skype: aimcontrol ADD: 45, Street 03, Ward 04, District 03, Ho Chi Minh, Vietnam http://www.aimcontrolgroup.com Also see these following Pre-purchase condition survey links: http://www.aimcontrolgroup.com/eg/104/0/pre-purchase-vessel-condition-survey-/-inspection.htm http://www.aimcontrolgroup.com/eg/s/97/0/pre-purchase-vessel-condition-surveys.htm
https://wn.com/Pre_Purchase_Condition_Inspection
SCP-616 The Vessel and the Gate | Object Class: Keter | cognitohazard scp
15:41

SCP-616 The Vessel and the Gate | Object Class: Keter | cognitohazard scp

  • Order:
  • Duration: 15:41
  • Updated: 14 Nov 2015
  • views: 50718
videos
SCP-616 is a prototype Boeing ███-███, designed by █████ █████████ and constructed in 16/06/1966 to specifications. Though superficially similar to the Boeing 737 which went into service shortly afterwards, SCP-616's model had various internal alterations, including [DATA EXPUNGED]. Despite the various alterations, the most important feature of SCP-616 is the center left emergency door, which has been dubbed SCP-616-1. Read along with me! ♣Read along: http://www.scp-wiki.net/scp-616 http://www.scp-wiki.net/interview-616-am Check out my SCP Playlists! Season 1: https://www.youtube.com/watch?v=H0xFp1HRmSQ&list=PLWbMmdyBjyTxAdPDhu-K3KbOuG-cebCvL Season 2: https://www.youtube.com/watch?v=CUMD8Jlhk5k&list=PLWbMmdyBjyTwtSTBO1AuXI0O_BoU1NH-j Help me out on Patreon! ▼Patreon▼ https://www.patreon.com/EastsideShowSCP Join me on Facebook and Twitter! ♣Facebook: https://www.facebook.com/EastsideShowscp ♣Twitter: https://twitter.com/Eastsideshow Other ♣Music by Kevin MacLeod: http://incompetech.com/ ♥Be sure to like, comment, share, and subscribe!♥
https://wn.com/Scp_616_The_Vessel_And_The_Gate_|_Object_Class_Keter_|_Cognitohazard_Scp
how to create piping plot plan in pdms draft software sp12.1
16:22

how to create piping plot plan in pdms draft software sp12.1

  • Order:
  • Duration: 16:22
  • Updated: 16 Aug 2014
  • views: 12226
videos
pdms , pdms modeling, You can get the information from this video how to create the GA drawings in Pdms draft. For more information regarding pdms modeling video and piping designing related information check from this source. http://www.pipingdesign.info/
https://wn.com/How_To_Create_Piping_Plot_Plan_In_Pdms_Draft_Software_Sp12.1
RoRo Reefer KNUD E. HANSEN A/S
1:22

RoRo Reefer KNUD E. HANSEN A/S

  • Order:
  • Duration: 1:22
  • Updated: 08 May 2014
  • views: 4113
videos
The design of this RoRo Reefer Vessel was developed in close co-operation with Stena RoRo and Reefer Intel. The vessel is intended for world-wide operation as a RoRo Reefer Vessel in the banana trade with special emphasis on fast and efficient cargo handling in port - also "green technology" has been considered for the machinery plant of this vessel. 40% lower unit cost 45% more capacity than traditional reefers Load and discharge in only 12 hours, compared to the average 36-48 hours Slow steaming/Fuel Saving - See more at: http://www.knudehansen.com/references/ro-ro-vessels/roro-refeer/#sthash.ckxT7no1.dpuf KNUD E. HANSEN A/S is a leading consultancy providing a comprehensive range of design, engineering and project management services to shipyards and ship owners around the world. Our innovative, customised solutions cover areas ranging from the building and conversion of all types of maritime vessels and offshore structures to energy optimisation and services for the offshore wind industry. Our approach is based on a combination of continuous innovation, the free exchange of ideas with our clients, and experience derived from many years spent working with every kind of vessel and maritime operator. Using these, we apply fresh thinking to each new project and tailor solutions that are both state-of-the-art and practical to meet the exact needs of each individual customer. Our achievements More than 650 vessels built to our designs More than 400 hull lines developed and model tested More than 225 conversions carried out to our designs and specifications More than 1,000 surveys, feasibility and R&D studies and other projects undertaken - See more at: http://www.knudehansen.com/#sthash.puq77W0a.dpuf
https://wn.com/Roro_Reefer_Knud_E._Hansen_A_S
RoPax Ferry Company - EUR 500,000
0:20

RoPax Ferry Company - EUR 500,000

  • Order:
  • Duration: 0:20
  • Updated: 18 Feb 2017
  • views: 52
videos
Full specification and contact details: https://www.apolloduck.com/z/494808 This is a unique opportunity to enter as major shareholder,in a shipowning company ,specialised in subsidised EU sea lines.This remarkable investment will be accompanied by a three to five yera amortisation plan and the flexibility and experience to operate in European Union member states. Minimum Capital required Euro 500.000.... read more at: https://www.apolloduck.com/z/494808
https://wn.com/Ropax_Ferry_Company_EUR_500,000
U.S. Military's Most Powerful Cannon - Electromagnetic Railgun - Shoots 100 miles - Mach 7
7:42

U.S. Military's Most Powerful Cannon - Electromagnetic Railgun - Shoots 100 miles - Mach 7

  • Order:
  • Duration: 7:42
  • Updated: 17 Mar 2017
  • views: 8424217
videos
The U.S. Navy is tapping the power of the Force (of Star Wars fame) to wage war. Its latest weapon is an electromagnetic railgun launcher. It uses a form of electromagnetic energy known as the Lorentz force to hurl a 23-pound projectile at speeds exceeding Mach 7. Engineers already have tested this futuristic weapon on land, and the Navy plans to begin sea trials aboard a Joint High Speed Vessel Millinocket in 2016. “The electromagnetic railgun represents an incredible new offensive capability for the U.S. Navy,” Rear Adm. Bryant Fuller, the Navy’s chief engineer, said in a statement. “This capability will allow us to effectively counter a wide range of threats at a relatively low cost, while keeping our ships and sailors safer by removing the need to carry as many high-explosive weapons.” The massive railgun that needs just one sailor to operate it relies on the electromagnetic energy of the Lorentz force—the combination of electric and magnetic forces on a point charge—for power. The Navy likes the weapon for several reasons, not the least of which it has a range of 100 miles and doesn’t require explosive warheads. That makes it far safer for sailors, and cheaper for taxpayers. According to the Navy, each 18-inch projectile costs about $25,000, compared to $500,000 to $1.5 million for conventional missiles. “[It] will give our adversaries a huge moment of pause to go: ‘Do I even want to go engage a naval ship?’” Rear Admiral Matt Klunder told reporters. “Because you are going to lose. You could throw anything at us, frankly, and the fact that we now can shoot a number of these rounds at a very affordable cost, it’s my opinion that they don’t win.” The Navy’s been talking about using railguns for the past ten years. The Office of Naval Research launched a prototype program in 2005, with an initial investment of $250 million committed through 2011. The Navy anticipates spending about that much more by 2017. Of course the Army is interested in having one too, and the Pentagon is in general interested in many aspects of the technology. In July, the Navy will display the electromagnetic railgun prototype at San Diego Naval Base. “Frankly, we think it might be the right time for them to know what we’ve been doing behind closed doors in a Star Wars fashion,” said Klunder. “It’s now reality. It’s not science fiction. It’s real and you can look at it.”
https://wn.com/U.S._Military's_Most_Powerful_Cannon_Electromagnetic_Railgun_Shoots_100_Miles_Mach_7
Piping Flange and Gasket Fabrication Formula
4:59

Piping Flange and Gasket Fabrication Formula

  • Order:
  • Duration: 4:59
  • Updated: 16 Dec 2015
  • views: 39866
videos
Piping Flange and Gasket Fabrication Formula. Piping,Welding,Non Destructive Examination-NDT Common Piping Angles and their Solutions,Known and Unknown Angles and Angle Chart,Solving Rolling Offsets,mitered Pipe Cuts,Multipiece Mitered turns, "Y" Layout,90 deg. Saddle on (tees) Standard Weight Pipe,Pipe Circumference Divided into Equal Parts,90 deg.on (tees) extra Strong Pipe,90 deg. Eccentric Pipe Intersections, 45 deg. laterals,Concentric and Eccentric Supports on 90 deg. Long Radius Elbow,3 Types,Angle between Bolt Holes of Flanges, Pipe template layout,orange Peel head layout,Concentric Reducer Layout,Eccentric Reducer Layout,laying out Bolt Holes in Flanges,laying Out Ordinate Lines and lengths,Tank coil layout,Angle Iron Miter Cuts and Brackets,Special Offsets and Solutions,Slip or Spectacle Blind Data,Centers of Eccentric reducers and Eccentric Flanges,Centers of 15 deg.,221/2,30 & 60 deg. Butt Weld Elbows from 90 deg. Long Radius Elbows,Pipe Thread,Dimension of Weldolet on Pipe, Dimension of Socket Weld & Screwed Fittings, Dimension of Flanges Cast Steel Valves,Dimension of Flanges Cast Steel Fittings,Commercial Pipe Sizes & Welding Fittings,General Dimension of Welding Fittings,General Dimension of Forged Steel Flanges,Bolt,Gasket & Ring Joint Number Charts,Wrench Sizes,Drill Sizes for Pipe Taps,& Tap Drill Size Charts,Bolt Charts for Orifice Type Flange,Outside & Inside Diameter of Pipe& Flange Bores,Comparison Chart for Packing & gasket materials,Hand Signal for boom Operated Equipment,Hand Signal for Overhead & gantry Cranes,Useful Information,Pipe Expansion,Pipe Bends,Circle,Inches&Feet Converted to millimeters,Conversion Constant,Decimal Equivalents,Fractions& millimeters,Safe Loads,for Wire and Manila Rope Charts,Decimal of a Foot,minutes converted to Decimals of a Degree and trigonometric formulas,Pipe& Water Weight Per Line Foot &Feet head of Water to PSI,Wire bending,Symbols,Computation.Piping Flange and Gasket Fabrication Formula
https://wn.com/Piping_Flange_And_Gasket_Fabrication_Formula
Liquefied natural gas
46:43

Liquefied natural gas

  • Order:
  • Duration: 46:43
  • Updated: 31 Jul 2014
  • views: 13927
videos
Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4) that has been converted to liquid form for ease of storage or transport. It takes up about 1/600th the volume of natural gas in the gaseous state. It is odorless, colorless, non-toxic and non-corrosive. Hazards include flammability after vaporization into a gaseous state, freezing and asphyxia. The liquefaction process involves removal of certain components, such as dust, acid gases, helium, water, and heavy hydrocarbons, which could cause difficulty downstream. The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). LNG achieves a higher reduction in volume than compressed natural gas (CNG) so that the (volumetric) energy density of LNG is 2.4 times greater than that of CNG or 60 percent of that of diesel fuel. This makes LNG cost efficient to transport over long distances where pipelines do not exist. Specially designed cryogenic sea vessels (LNG carriers) or cryogenic road tankers are used for its transport. LNG is principally used for transporting natural gas to markets, where it is regasified and distributed as pipeline natural gas. It can be used in natural gas vehicles, although it is more common to design vehicles to use compressed natural gas. Its relatively high cost of production and the need to store it in expensive cryogenic tanks have hindered widespread commercial use. This video is targeted to blind users. Attribution: Article text available under CC-BY-SA Creative Commons image source in video
https://wn.com/Liquefied_Natural_Gas
Test Package Satisfied - PipingWeldingNonDestructiveExamination-NDT
21:00

Test Package Satisfied - PipingWeldingNonDestructiveExamination-NDT

  • Order:
  • Duration: 21:00
  • Updated: 13 Mar 2017
  • views: 765
videos
Piping,Welding,Non Destructive Examination-NDT Common Piping Angles and their Solutions,Known and Unknown Angles and Angle Chart,Solving Rolling Offsets,mitered Pipe Cuts,Multipiece Mitered turns, "Y" Layout,90 deg. Saddle on (tees) Standard Weight Pipe,Pipe Circumference Divided into Equal Parts,90 deg.on (tees) extra Strong Pipe,90 deg. Eccentric Pipe Intersections, 45 deg. laterals,Concentric and Eccentric Supports on 90 deg. Long Radius Elbow,3 Types,Angle between Bolt Holes of Flanges, Pipe template layout,orange Peel head layout,Concentric Reducer Layout,Eccentric Reducer Layout,laying out Bolt Holes in Flanges,laying Out Ordinate Lines and lengths,Tank coil layout,Angle Iron Miter Cuts and Brackets,Special Offsets and Solutions,Slip or Spectacle Blind Data,Centers of Eccentric reducers and Eccentric Flanges,Centers of 15 deg.,221/2,30 & 60 deg. Butt Weld Elbows from 90 deg. Long Radius Elbows,Pipe Thread,Dimension of Weldolet on Pipe, Dimension of Socket Weld & Screwed Fittings, Dimension of Flanges Cast Steel Valves,Dimension of Flanges Cast Steel Fittings,Commercial Pipe Sizes & Welding Fittings,General Dimension of Welding Fittings,General Dimension of Forged Steel Flanges,Bolt,Gasket & Ring Joint Number Charts,Wrench Sizes,Drill Sizes for Pipe Taps,& Tap Drill Size Charts,Bolt Charts for Orifice Type Flange,Outside & Inside Diameter of Pipe& Flange Bores,Comparison Chart for Packing & gasket materials,Hand Signal for boom Operated Equipment,Hand Signal for Overhead & gantry Cranes,Useful Information,Pipe Expansion,Pipe Bends,Circle,Inches&Feet Converted to millimeters,Conversion Constant,Decimal Equivalents,Fractions& millimeters,Safe Loads,for Wire and Manila Rope Charts,Decimal of a Foot,minutes converted to Decimals of a Degree and trigonometric formulas,Pipe& Water Weight Per Line Foot &Feet head of Water to PSI,Wire bending,Symbols,Computation. Playlist: Piping https://www.youtube.com/playlist?list=PLcAzKoCrAxLSJr1taf2sDePXYE_wMgKsy Welding https://www.youtube.com/playlist?list=PLcAzKoCrAxLRCx8KtEwXF3uM7QdfAz8cW NDT https://www.youtube.com/playlist?list=PLcAzKoCrAxLQmaYtAe3j21xfoP4Xw6kY- I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
https://wn.com/Test_Package_Satisfied_Pipingweldingnondestructiveexamination_Ndt
Drawing Generation in CADWorx
14:17

Drawing Generation in CADWorx

  • Order:
  • Duration: 14:17
  • Updated: 13 May 2017
  • views: 639
videos
Help us caption & translate this video! http://amara.org/v/6uEo/
https://wn.com/Drawing_Generation_In_Cadworx
Pipeline Test pack dossier administration
3:16

Pipeline Test pack dossier administration

  • Order:
  • Duration: 3:16
  • Updated: 01 Feb 2017
  • views: 312
videos
Test Pack Dossier Management Database Application., part of the article : "Get efficient, not just busy. Pipeline Testing: A Test Pack Dossier Management Application" http://bit.ly/2kXbWSf
https://wn.com/Pipeline_Test_Pack_Dossier_Administration
Aveva PDMS\Paragon\Globe Valve Category Creation - PART II
9:25

Aveva PDMS\Paragon\Globe Valve Category Creation - PART II

  • Order:
  • Duration: 9:25
  • Updated: 04 Aug 2014
  • views: 3528
videos
Create Globe Valve Category in Paragon SOCIAL LINK: https://www.linkedin.com/profile/view?id=189823632&trk=nav_responsive_tab_profile
https://wn.com/Aveva_Pdms\Paragon\Globe_Valve_Category_Creation_Part_Ii
PML PDMS GA support tool
6:00

PML PDMS GA support tool

  • Order:
  • Duration: 6:00
  • Updated: 26 Dec 2017
  • views: 49
videos
https://wn.com/Pml_Pdms_Ga_Support_Tool
Clip & Orthogen, Section VIEW
5:09

Clip & Orthogen, Section VIEW

  • Order:
  • Duration: 5:09
  • Updated: 05 Jul 2017
  • views: 329
videos
Structural Section VIEW
https://wn.com/Clip_Orthogen,_Section_View
CADWorx - IConfigure Tie Into 3D Model
12:58

CADWorx - IConfigure Tie Into 3D Model

  • Order:
  • Duration: 12:58
  • Updated: 08 Nov 2017
  • views: 1056
videos
Keystone Employee Training tieing ISOGEN to CADWorx plant for the Isometric generation.
https://wn.com/Cadworx_Iconfigure_Tie_Into_3D_Model
AVEVA PDMS - drafting module basics
11:24

AVEVA PDMS - drafting module basics

  • Order:
  • Duration: 11:24
  • Updated: 25 Mar 2014
  • views: 37490
videos
this video contains basic drafting skills for general idea of aveva pdms 12 including inserting departments registry, views dimensions, notes, tags, and export to Dxf(Autocad)
https://wn.com/Aveva_Pdms_Drafting_Module_Basics
CHHELLO DIVAS with Eng Subtitles - Superhit Urban Gujarati Movie Full 2017 - A New Beginning
2:19:39

CHHELLO DIVAS with Eng Subtitles - Superhit Urban Gujarati Movie Full 2017 - A New Beginning

  • Order:
  • Duration: 2:19:39
  • Updated: 26 Apr 2016
  • views: 14080247
videos
The Movie revolves around the lives of eight friends, showcasing their journey of growing up, highs and lows of their relationship, love and compassion, end of college days and beginning of a new life. Star Cast: Yash Soni | Malhar Thakar | Janki Bodiwala | Mitra Gadhvi | Kinjal Rajpriya | Aarjav Trivedi | Rahul Raval | Netri Trivedi | Mayur Chauhan | Prapti Ajwalia | Prashant Barot | Jitendra Thakkar Written & Directed by: Krishnadev Yagnik Presented by: Belvedere Films Genre: Comedy નવા નાટક, ફિલ્મ, ગીત, કોમેડી સીન વગેરે અપલોડ થયાની જાણકારી તમારા ઇમેઇલ એડ્રેસ પર મેળવવા માટે હમણા જ આ ચેનલને સબ્સ્ક્રાઇબ કરો: http://www.youtube.com/subscription_center?add_user=shemaroogujarati To get regular updates on new releases(Natak, Films, Songs, Comedy Scenes and much more), subscribe to our channel: http://www.youtube.com/subscription_center?add_user=shemaroogujarati To Enjoy Gujarati Plays Nonstop, Download Shemaroo Gujarati Natak App on your phone. Give missed call on 9222231242 to download. Or Visit Apple App Store : https://goo.gl/RLBoqe Google Play Store : https://goo.gl/LqlaQj Urban Gujarati Movies (Gujjubhai The Great, Chhello Divas, Polam Pol, Kevi Rite Jaish & More) http://bit.ly/2eEJhPa Best of Siddharth Randeria ( Gujjubhai ) https://goo.gl/IytVqc Best of Sanjay Goradia https://goo.gl/lNf4vE Best Gujarati Dramas ( શ્રેષ્ઠ ગુજરાતી ડ્રામા ) https://goo.gl/OhoOOx Comedy Dramas (રમુજી નાટકો ) https://goo.gl/95Wnzx Family Comedy Dramas ( કૌટુંબિક ડ્રામા ) https://goo.gl/pRMUkR Other Dramas ( નાટકો ) https://goo.gl/H8vKj8 Gujarati Natak Promos https://goo.gl/HZqjKk Gujarati Jokes – Vasant Paresh, Sairam Dave, Harsur Gadhvi & others https://goo.gl/ODJ0jp Gujarati Songs – Garba, Aarti, Bhajan, Navratri, Dandiya, Lok Geet, Gujarati film songs and more https://goo.gl/UxhFVG Sign up for Free and get daily updates on New Videos, exclusive Web Shows, contests & much more http://youtube.shemaroo.com/default.aspx Send us your feedback and suggestions at : connect@shemaroo.com Happy Thanksgiving Day to all NRIs from Gujarat residing in United States of America.
https://wn.com/Chhello_Divas_With_Eng_Subtitles_Superhit_Urban_Gujarati_Movie_Full_2017_A_New_Beginning
Prepper Tip: Stainless Steel & BPA Free Plastic Bottles - Project Prepper
7:20

Prepper Tip: Stainless Steel & BPA Free Plastic Bottles - Project Prepper

  • Order:
  • Duration: 7:20
  • Updated: 21 Jan 2015
  • views: 316
videos
Running through some brief info on the stainless steel water bottles and BPA free plastic water bottles specs and explaining their importance for EDC and Survival alike.
https://wn.com/Prepper_Tip_Stainless_Steel_Bpa_Free_Plastic_Bottles_Project_Prepper
How to  model vertical equipment in pdms SP12.1
18:52

How to model vertical equipment in pdms SP12.1

  • Order:
  • Duration: 18:52
  • Updated: 25 Aug 2014
  • views: 3042
videos
In this video user can lean how to do the equipment modeling in pdms 12.0 along with how to modify the equipment etc.For more info check here http://www.pipingdesign.info/
https://wn.com/How_To_Model_Vertical_Equipment_In_Pdms_Sp12.1
OrthoGen for CADWorx
52:03

OrthoGen for CADWorx

  • Order:
  • Duration: 52:03
  • Updated: 28 Mar 2017
  • views: 1061
videos
https://wn.com/Orthogen_For_Cadworx
How to create  Structure MTO Report in pdms sp12.1
7:14

How to create Structure MTO Report in pdms sp12.1

  • Order:
  • Duration: 7:14
  • Updated: 08 Mar 2014
  • views: 4696
videos
Check from this video how to create the MTO report in pdms. For more information regarding structure, piping and equipment modeling in pdms check here http://www.pipingdesign.info/
https://wn.com/How_To_Create_Structure_Mto_Report_In_Pdms_Sp12.1
MACRO IN PDMS FOR PIPE-SUPPORT AUTONAMING WITH SETTING RULES AND FILTER
1:52

MACRO IN PDMS FOR PIPE-SUPPORT AUTONAMING WITH SETTING RULES AND FILTER

  • Order:
  • Duration: 1:52
  • Updated: 24 May 2014
  • views: 2260
videos
COMPARING ALL MEMBERS OF STRUC AND LIST ALL THOSE MEMBER ARRANGE THEM, IF DESCRIPTION IS THE SAME, COMPARING ALL STRUC EACH OTHER AND FILTER THEM IF ALL MEMBERS OF STRUC ARE THE SAME OF QUANTITY AND THE SAME OF WEIGHT, PUTTING IN THE SAME NUMBER
https://wn.com/Macro_In_Pdms_For_Pipe_Support_Autonaming_With_Setting_Rules_And_Filter
×